TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
A DIY featured by Hunker shows how to turn plastic shower curtain rings into raised accents on a slender glass vase. The project uses hot glue to attach the rings and spray paint to finish the vase; its cost and durability depend on the materials chosen.
A DIY project featured by Hunker repurposes plastic shower curtain rings as raised accents on a slender glass vase, then paints the whole piece for a unified look. The project, attributed to creator TropicalEssenceHome, offers a way to decorate a basic container using inexpensive craft supplies rather than buying a new decorative vase.
In the reported design, the creator attaches four plastic rings near the top of the vase, spacing them apart and angling them so they rest against the glass. The ring closures face the back, leaving a smoother-looking front. A small amount of hot glue at the back holds each ring in place, and spray paint covers the vase and rings after the arrangement is set.
The vase must be narrow enough for the rings to fit over its neck. Hunker says shower rings are usually about 2 inches in diameter; a vase may widen toward its base if the upper section remains narrow enough. The report suggests reusing a vase already at home or looking for an inexpensive one at a thrift store. It also notes that a Dollar Tree 12-pack of clear plastic rings was listed at $1.50 in the source report; prices and availability can change.
The design can be adjusted by changing the number and spacing of the rings, or by using oblong C-shaped rings instead of round ones. Paint options include black, a light neutral or a brighter color, with either a matte or glossy finish. Hunker also describes painting the rings and vase separately for contrast, adding metallic paint along the edges, or using air-dry clay to thicken or reshape the rings. These are suggested variations, not reported results from a durability test.
A Low-Cost Way to Refresh a Vase
The idea matters to readers looking for a small-scale way to reuse household or low-cost materials. Rather than treating shower rings only as curtain hardware, the project gives them a second function as three-dimensional decoration. It may be especially useful for a plain vase that is structurally sound but visually simple.
The project also leaves room for personal choices without requiring a particular color or layout. Using rings already on hand could reduce the cost, while selecting a thrifted vase or a different ring shape changes the materials and finish. The source does not provide a full cost breakdown, so the $1.50 ring price alone should not be taken as the total project cost; paint, glue and any extra accents add to it.
Popular right now
Ninja Hot & Iced XL Coffee Maker with Rapid Cold Brew, Black, CM371
Vitamix Propel Series 750 Professional-Grade Blender, 4 Programs, Black
Ninja CREAMi Scoop & Swirl 13-in-1 Ice Cream and Soft Serve Maker, NC701
As an affiliate, we earn on qualifying purchases.
How the Ring-and-Vase Design Works
The source presents the vase as one of several decorative uses for plastic shower rings, building on the broader idea of repurposing inexpensive household items for craft projects. Its defining feature is the contrast between a plain glass base and the added ring shapes. Painting both parts in the same color visually joins them, while different colors or metallic detailing make the additions stand out.
Hunker says the original arrangement uses four rings near the vase’s top, but that count is not a requirement. Rings can be moved closer together or placed so they touch, and the closures can be turned toward the back to keep the front appearance more consistent. The report identifies available ring styles and finishes as options; it does not say that all listed products were used in the creator’s original vase.
“The creator attaches the rings to a slender glass vase and paints the piece black for a modern, sculptural upgrade to a basic floral container.”
— Hunker, reporting on the DIY by TropicalEssenceHome
Cost, Fit and Finish Vary
The source does not state when the original creator made the vase, provide a complete materials budget, or report how well the hot-glued rings hold up over time. It also does not specify the exact vase dimensions, the type of spray paint used, or whether the finished vase is intended to hold water and fresh flowers. Readers should treat it as a decorative craft unless the container’s water resistance and finish are confirmed.
The cited Dollar Tree price and product availability may have changed since Hunker’s report. The source gives general guidance that the vase neck should fit inside the rings, but it does not provide measurements for a particular vase or ring brand. Results may differ depending on the materials and how the rings sit against the glass.
Check Materials Before Starting
The next step for anyone trying the project is to compare the vase neck with the rings and test the proposed arrangement before gluing. Hunker’s instructions call for attaching the rings with hot glue, then spray-painting the assembled piece; its suggested variations include separate colors, metallic edging and air-dry clay. No further update or testing is described in the supplied report.
Because the project uses hot glue and spray paint, follow the products’ labels and safety directions. Use spray paint in a well-ventilated area and protect nearby surfaces. Confirm that the chosen paint and glue are appropriate for the materials, and allow the finish to dry as directed before handling or displaying the vase.
Key Questions
What supplies does the vase project use?
The main materials are a slender vase, plastic shower curtain rings, hot glue and spray paint. Optional additions mentioned by Hunker include metallic paint and air-dry clay.
How many shower rings does the original design use?
Hunker describes the original design with four rings spaced near the top of the vase. The number and spacing can be changed to suit the vase.
What kind of vase will fit the rings?
The neck needs to be narrow enough for the rings to fit over it. Hunker says rings are usually about 2 inches in diameter, but recommends checking the actual rings and vase rather than relying on a general measurement.
Does the source say the finished vase can hold water?
No. The source describes a decorative makeover but does not confirm whether the finished vase is suitable for holding water or fresh flowers.
How much does the project cost?
The source cited a $1.50 price for a 12-pack of clear plastic shower rings at Dollar Tree, but that price may change and does not include the vase, glue, paint or optional decorations.
Source: rss
